Remodel Downlight

R6RM

Specification Grade, 6-inch Round, 16 Gauge Galvanized Steel Housing with Die-Cast Aluminum Heat Sink
Remodel Downlight Housing; requires minimum 3-inch clearance around Housing from insulation material
Thermal protection provided in case of improper insulation use
Heavy duty steel plaster ring is secured to ceiling by three (3) spring clamps; LED Module/Trim Assembly is held in place with three (3) trim-lock dimpled spring clips
Quick-connect Light Engine for easy installation and removal
Available in 2700K, 3000K, 3500K and 4000K CCTs; 80 CRI min., 83 typical; a high CRI of 90+ available
Excellent fixture-to-fixture color consistency with a 3-step MacAdam Ellipse tolerance
Dual Nailer Hanger Bars are included; adjustable for 16- and 24-inch center joists, may be extended to rest on T-Bar ceilings. Optional clip-on T-Bar Hangers available.
Pre-wired Junction Box with eight (8) 1/2- inch Knockouts and four (4) 3/4- inch Knockouts; approved for Through Circuit Wiring
Output over-voltage, over-current and short circuit protection
All R6 Downlights are available for non-dimming and dimming applications; refer to the Dimming Specification Sheet for compatible Dimmers
Drivers are fully accessible from below the ceiling and can be easily removed
Flanged Specification Grade Trims available in several different styles and finishes
Trimless options and Sloped Ceiling Adapters cannot be used with Remodel Style Housings
UL8750 and Class 2 Compliant

Updated